Gallery

Specifications:

• 30mm American Oak Treads
• 30mm Overhang | End Grain Detail
• 18mm Pine Risers Mitered to Stringer
• Cut Pine Stringers
• 12mm Frameless Clear Toughened Glass
• 38mm S-Steel Patch Fittings P/Coated Mannex Black
• 25x21 S-Steel Channel P/Coated Mannex Black
• 38mm S-Steel Round Wall Rail on Brackets P/Coated Mannex Black

Note: Stain/Paint By Others
Builder: Home Impact
Location: NSW (2040)
Job Type: New Build

Specifications:

• Open Riser
• 60mm American Oak Treads
• Closed Stringers for Paint
• 12mm Clear Toughened Frameless Glass
• 38mm Stainless-Steel Patch Fittings
• 50mm Round Stainless-Steel Spigots
• 38mm Round Stainless-Steel Rail
• 25x21 Stainless-Steel Channel
• 60mm American Oak Void Nosing

Note: Stain/Paint By Others
Location: NSW (2030)
Job Type: Renovation

Top Staircase Specifications:

• 250x10 Closed Mild Steel Stringer
• Powdercoated Mannex Black
• 70mm Laminated Spotted Gum Treads
• Square Aris Nosing
• 20mm Over Riser
• 2 & 3 Winder Set

Balustrade Specifications:

• 12mm Toughened Clear Frameless Glass
• 38mm Stainless Steel Patch Fittings
• 38mm Round Stainless Steel Rail to Rake
• Standard Stainless Steel Brackets to Rake
• 25x20 Stainless Steel Channel to Level
• All Stainless Steel Powdercoated Black

Note: Paint/Stain By Others
Location: NSW (2090)
Job Type: New Build

Specifications:

• MDF Treads & Risers for Flooring Over
• 2 Winder Set
• Closed Vic Ash Face Stringers for Paint
• 12mm Clear Toughened Frameless Glass to ceiling
• S-Steel Patch Fittings Hidden by Stringers
• 25x20 Stainless Steel Channel Fixed to Ceiling
• (S8) Small Ellipse Spotted Gum Wall Rail
• White Wall Brackets

Note: Paint/Stain & Flooring By Others
Location: NSW (2087)
Job Type: Renovation

Bottom Half Staircase Specifications:

• Closed Pine Riser Mitered to Cut Stringer
• 80mm Spotted Gum Treads w/ Square Aris Nosing
• 20mm over riser (End Grain detail)
• Bullnose Details
• 1/4 Landing

Top Half Staircase Specifications:

• Open Riser
• 80mm Spotted Gum Treads w/ Square Aris Nosing
• 40mm Spotted Gum Cut Stringers
• Stringers set in 100mm from end of tread
• Spotted Gum Floor Capping

Balustrade Specifications:

• 12mm Toughened Clear Glass
• 25 x 20 Stainless Steel Channel
• 38mm Stainless-Steel Patch Fittings
• 50mm Round Stainless-Steel Handrail
• Standard Stainless-Steel Brackets

*Swipe to see Before & After photos*
Note: Paint & Flooring By Others